Maintenance Guide –Finishes Care & Maintenance
To maintain the finish quality of our TIvoli System, please follow the cleaning procedures provided below.
With regular care and maintenance, the C&R furniture will provide years of superior performance and satisfaction. The instruction for the care and maintenance are provided to you as a service. No warranty is implied since results vary.
For normal cleaning, wash coated metal surfaces with a soft cloth soaked in
detergent and warm water; rinse thoroughly and dry.
Remove scuff marks from low-gloss coatings with pre-softened paste wax,
following the manufacturer’s instructions.
For assistance in determining the appropriate colour and gloss for touch up paint,
please contact C&R personnel.
Poly-carbonate / Acrylic Panels
For normal cleaning, first rinse the surface with clean water to remove any
particles of dust or other abrasive materials. Sponge the plastic gently with warm
water and a mild, nonabrasive soap or a solution of ammonia and water. Rinse
thoroughly with clean water and dry with a soft cloth. After cleaning, the
polycarbonate can be polished with a good wax polish applied with a clean, soft
Do not use benzene, acetone, denatured alcohol, or gasoline. These solvents
soften the surface of the plastic and may cause damage. Also avoid using glass
cleaning compounds, abrasive cleaners, and hard instruments. Make sure
cleaning materials are free of grit and other foreign materials.
For normal cleaning, use products specifically designed for glass
For normal cleaning, wash plastic surfaces with a soft cloth soaked in mild
detergent and warm water. Rinse thoroughly and drop with a soft cloth. Do not
use solvents or abrasive kitchen cleaners.
Melamine / Laminates
Products using melamine and laminate include tabletops, work surfaces, counter
tops, overhead cabinets, filing cabinets.
For normal cleaning, wash melamine and laminate with a soft cloth and a solution
of mild detergent and warm water. Rinse thoroughly and dry with a soft cloth.
For minor report of burns or other stubborn marks, apply a nonabrasive liquid
kitchen cleanser with a soft cloth soaked in warm water. Rub in the director of the
grain; use caution to avoid damaging the surface texture or gloss. If no grain
direction is visible, rub with a light, in circular motion.
Do not use powdered abrasives or other harsh cleansers like hypochlorite bleach,
hydrogen peroxide, nitric or hydrochloric acids, or lye, they may deface the surface
and change the finish colour.
For normal cleaning, apply a pre-soften paste wax to polished aluminum
components following the manufacturer’s instructions. In humid atmospheres near
salt water, apply the wax once a month. In other areas, apply wax evenly three
months to maintain the appearance of the aluminum.