Maintenance

Previous Next
    maintenance
    maintenance

    Maintenance Guide –Finishes Care & Maintenance

    To maintain the finish quality of our TIvoli System, please follow the cleaning
    procedures provided below. With regular care and maintenance, the C&R
    furniture will provide years of superior performance and satisfaction.
    The instruction for the care and maintenance are provided to you as a service.
    No warranty is implied since results vary.

    Powdercoated Metal
    For normal cleaning, wash coated metal surfaces with a soft cloth soaked in
    detergent and warm water; rinse thoroughly and dry.
    Remove scuff marks from low-gloss coatings with pre-softened paste wax,
    following the manufacturer’s instructions.
    For assistance in determining the appropriate colour and gloss for touch up paint,
    please contact C&R personnel.

    Poly-carbonate / Acrylic Panels
    For normal cleaning, first rinse the surface with clean water to remove any
    particles of dust or other abrasive materials. Sponge the plastic gently with warm
    water and a mild, nonabrasive soap or a solution of ammonia and water. Rinse
    thoroughly with clean water and dry with a soft cloth. After cleaning, the
    polycarbonate can be polished with a good wax polish applied with a clean, soft
    flannel pad.
    Do not use benzene, acetone, denatured alcohol, or gasoline. These solvents
    soften the surface of the plastic and may cause damage. Also avoid using glass
    cleaning compounds, abrasive cleaners, and hard instruments. Make sure
    cleaning materials are free of grit and other foreign materials.

    Glass
    For normal cleaning, use products specifically designed for glass

    Plastic
    For normal cleaning, wash plastic surfaces with a soft cloth soaked in mild
    detergent and warm water. Rinse thoroughly and drop with a soft cloth. Do not
    use solvents or abrasive kitchen cleaners.

    Melamine / Laminates
    Products using melamine and laminate include tabletops, work surfaces, counter
    tops, overhead cabinets, filing cabinets.
    For normal cleaning, wash melamine and laminate with a soft cloth and a solution
    of mild detergent and warm water. Rinse thoroughly and dry with a soft cloth.
    For minor report of burns or other stubborn marks, apply a nonabrasive liquid
    kitchen cleanser with a soft cloth soaked in warm water. Rub in the director of the
    grain; use caution to avoid damaging the surface texture or gloss. If no grain
    direction is visible, rub with a light, in circular motion.
    Do not use powdered abrasives or other harsh cleansers like hypochlorite bleach,
    hydrogen peroxide, nitric or hydrochloric acids, or lye, they may deface the surface
    and change the finish colour.

    Polished Aluminum
    For normal cleaning, apply a pre-soften paste wax to polished aluminum
    components following the manufacturer’s instructions. In humid atmospheres near
    salt water, apply the wax once a month. In other areas, apply wax evenly three
    months to maintain the appearance of the aluminum.
    .
    ©2017 C&R INTERIORS PTE LTD ALL RIGHTS RESERVED